- DELL LASER MFP 1815DN DRIVER MANUAL WIRELESS CAPABLE CRACKED
- DELL LASER MFP 1815DN DRIVER MANUAL WIRELESS CAPABLE INSTALL
- DELL LASER MFP 1815DN DRIVER MANUAL WIRELESS CAPABLE SKIN
DELL LASER MFP 1815DN DRIVER MANUAL WIRELESS CAPABLE INSTALL
(10) Avoid damp or dusty areas, install the printer in a clean well ventilated location. Do not touch the machine or the power cord if it is still connected to the wall socket in these weather conditions. The power source when such weather conditions are expected. (9) Use caution during thunder or lightening storms.Dell recommends that this machine be disconnected from Take care not to cut or damage the power cable or plugs when moving the machine. Any such defects should be repaired immediately.
DELL LASER MFP 1815DN DRIVER MANUAL WIRELESS CAPABLE CRACKED
(8) Ensure that the power sockets and plugs are not cracked or broken in any way. Some chemicals can attack the coating on the power cable, weakening the cover or exposing cables causing fire and shock risks. Replace a damaged power cable immediately, do not reuse or repair the damaged cable. If the power cable is damaged it could overheat and cause a fire or exposed cables could cause an electric shock. Do not place objects on top of the power cable. Do not allow it to become twisted, bent sharply round corners or other wise damaged. When removing the power connector grip it firmly and pull. The power connector must be inserted com - pletely otherwise a poor contact could cause overheating possibly leading to a fire. (6) Use caution when inserting or removing the power connector. When servicing the printer remove the power plug from the wall socket. (5) Never touch the plugs on either end of the power cable with wet hands, this can cause electric shock. Do not allow paper clips, pins or other foreign objects to fall into the printer these could cause a short circuit leading to an electric shock or fire hazard. (4) Do not allow water or other liquids to spill into the printer, this can cause electric shock. (3) Do not overload the power socket, this could lead to overheating of the cables inside the wall and could lead to a fire. Use of an incorrectly specified cable could cause the cable to overheat and potentially cause a fire. (2) Use only the power cable supplied with the printer. (1) Use only the correct voltage, failure to do so could damage the printer and potentially cause a fire or electric shock. The toner powder contained in the toner cartridge may be harmful and if swallowed you should contact a doctor.ġ.2.2 Electric Shock and Fire Safety Precautionsįailure to follow the following instructions could cause electric shock or potentially cause a fire. (2) Please keep toner cartridges away from children. If the liquid gets into the mouth or is swallowed see a doctor immediately.
DELL LASER MFP 1815DN DRIVER MANUAL WIRELESS CAPABLE SKIN
Contact with the skin should be avoided, wash any splashes from eyes or skin immediately and contact your doctor. (1) If the LCD control panel is damaged it is possible for the liquid inside to leak. This product contains toxic materials that could cause illness if ingested. VARO! - AVATTAESSA JA SUOJALUKITUS OHITETTAESSA VARNING - OSYNLIG LASERSTR LNING N R DENNA DEL USYNLIG LASERSTR LNING VED BNING, N RĪDVARSEL. PRECAUCION - RADIACION LASER IVISIBLE CUANDO SE ABRE.ĪDVARSEL.
When using this product, these basic safety pre-cautions should always be followed to reduce risk of fire, electric shock, and injury to persons.ĪTTENTION - RAYONNEMENT LASER INVISIBLE EN CASĪTTENZIONE - RADIAZIONE LASER INVISIBILE IN CASO DI The reflected beam, although invisible, can damage your eyes. Warning > Never operate or service the printer with the protective cover removed from Laser/Scanner assembly. The laser system and printer are designed so there is never any human access to laser radiation above a Class I level during normal operation, user maintenance, or prescribed service condition. Class I laser products are not considered to be hazardous.
to conform to the requirements of DHHS 21 CFR, chapter 1 Subchapter J for Class 1(1) laser products, and elsewhere, it is certified as a Class I laser productĬon-forming to the requirements of IEC 825. Do not make any unauthorized changes orĪdditions to the printer, these could cause the printer to malfunction and create electric shock or fire haz-ards. There are no user serviceable parts inside the printer. This printer should only be serviced by a suitably trained and qualified service engineer.
High voltages and lasers inside this product are dangerous. (1) Only to be serviced by appropriately qualified service engineers. In order to prevent accidents and to prevent damage to the equipment please read the precautions listed below carefully before servicing the printer and follow them closely.
0 kommentar(er)
